Blog
The Latest Guide to Change Amana Refrigerator Water Filters in 2024
Table of Contents
What is an Amana Refrigerator Water Filter?
Amana refrigerator water filters are devices that can remove innumerable contaminants from the water dispensed from your refrigerator. These devices are used to make sure your drinking water is clean, sterile, and pure. They can be found inside the refrigerator, and replaced if necessary, all through effortless steps.
The company’s water filters are capable of removing diverse contaminants such as chlorine, lead, and other impurities from the water, thereby sweetening the taste and quality of your water. These filters are presented in several types, including the EveryDrop water filters. Apart from all their versatile benefits, Amana refrigerator water filters minimize the risk of waterborne diseases and guarantee the high quality of your water.
Where Can I Find the Water Filter on Amana Refrigerators?
It is needless to say the location of the water filter in an Amana refrigerator hinges on the model of the appliance. Some common places in these refrigerators where you can possibly find the filter are as follows:
- Inside the Refrigerator: The device is often findable in the upper right corner of the refrigerator compartment. You may find a small door/cover that provides access to the filter.
- Bottom Front Grille: In some Amana refrigerator models, the filter is located in the bottom front grille. Sometimes, you have to remove the grille to have access to the filter.
- Side-by-Side Models: For these refrigerator models, the filter is discoverable in the upper right corner of the refrigerator side.
- French Door Models: For these refrigerator models, the filter is located in the upper right corner of the refrigerator compartment.
- Bottom-Freezer Models: For these refrigerator models, the filter is findable in the upper right corner of the refrigerator compartment.
How to Find an Amana Refrigerator Model Number?
You can perform the following tasks to find the model number of your Amana refrigerator:
- Check the Inside Wall: The model number is most of the time findable on the inside wall of the refrigerator compartment. Check both the left and right walls on the doorjamb.
- Remove the Crisper Drawer: The next task to search for the model number is to remove the lower crisper drawer and look on the wall and in the back for the model tag.
- Check the Kick Plate: If you cannot find the model number through previous tasks, remove the kick plate at the bottom of the refrigerator. You might need to use a flashlight for this location.
If you still cannot find the model number, you may have to check the user manual of the appliance. It must contain information on where you can find the number. Finally, if none of the options above works, you can contact Amana’s customer support team so they can provide assistance based on your refrigerator model.
What Kind of Water Filter Does My Amana Refrigerator Use?
It might not be easy to detect the type of your Amana refrigerator water filter unless you go through one of the procedures below:
- Check the Existing Filter: If you already have a filter installed in your Amana refrigerator, you can check its part number or model number printed on it. Amana’s common water filters include the EveryDrop series, such as EDR1RXD1, EDR3RXD1, and EDR4RXD1.
- Use a Filter Finder Tool: Some websites such as Discount Filters and Sears Parts Direct present filter finder tools where you can submit your refrigerator’s model number before the tool gives you the correct water filter.
- Check Online Retailers: Some retailers such as Lowe’s and Amazon generally show compatible water filters for various Amana refrigerator models. Simply search for Amana refrigerator water filters on these websites to find the correct filter.
If you are still not sure about your water filter type, you can simply check your appliance’s user manual or contact Amana’s customer support team and ask for help. Remember that before you contact the company, you have to understand your refrigerator model.
The Correct Steps for Changing Amana Refrigerator Water Filters
Replacing an Amana refrigerator water filter is the best thing you can do to conserve its filtration efficiency. The critical consideration here is to replace the device correctly. To do so, you can follow these steps:
Step 1: Disconnect the Power
Before you do anything, unplug the appliance power cord from the outlet. This step is critical in ensuring your safety all the while you handle the replacement job.
Step 2: Locate the Water Filter
We already discussed where you can find your water filter in an Amana refrigerator. Based on that, locate your device and get ready for the replacement.
Step 3: Open the Water Filter Cover
Your filter probably has a small door or cover. Try to open it so you can have access to the filter.
Step 4: Remove the Old Filter
You can handle the removal based on the type of your water filter. For twist-out filters, twist the filter counterclockwise until it stops, and then, pull the device out. If your filter has a push-button eject mechanism, try to push the eject button so the filter is released. Then, pull the device out.
Step 5: Install the New Filter
Again, if your filter is a twist-out model, insert the new filter and twist it clockwise until it stops. Otherwise, if your device comes with a push-button eject mechanism, insert the new filter until the eject button pops out. That is how the main installation works.
Step 6: Run Water Through the Dispenser
Now, it is time to purge any remaining air and residues from the system. To do this, run a few gallons of water through the dispenser. This is to make sure the dispensed water finally gets clean and free from any contaminants that might have remained in the old filter.
Step 7: Reset the Water Filter Replacement Reminder Light
If your filter is equipped with a filter replacement reminder light, follow the instructions in your user manual to reset it. This step is crucial because the light will remind you of the replacement time in the future. Otherwise, you may simply forget to replace the device in time, which can result in critical water problems.
Step 8: Reconnect the Power
Now, simply plug the appliance back into the outlet and turn it on.
Step 9: Check for Leaks
You have to make sure there are no leaks around the filter housing. If you see any leaks, make sure you tighten the filter or check the filter housing gasket to see if you need to modify some sections.
Step 10: Dispose of the Old Filter
Based on your local recycling guidelines, dispose of the old filter properly.
How Often to Change Amana Refrigerator Water Filters?
Amana suggests that you preferably replace the water filter of its refrigerators once every 6 months. However, the frequency of filter replacement hinges on some factors.
First of all, it depends on your water usage. If you consume a lot of water or your family is large, you might need to replace the filter sooner than the recommended 6-month period.
What’s more, your water quality affects this frequency. If your local water supply comes with high levels of contaminants, you might have to change the filter sooner.
In addition to that, different types of these filters might come with different lifespans, and the 6-month period is a general recommendation. It is also suggested that you check your refrigerator user manual to see if it provides a specific replacement interval for its filter.
The most accurate approach is always to refer to the user manual of the appliance. You can find Amana’s recommended replacement schedule for your specific refrigerator model. Also, if your appliance comes with a water filter replacement reminder light, you can see when it indicates the time for a replacement.
How to Clean Amana Refrigerator Water Filters?
It is generally not recommended that you clean your Amana refrigerator water filter because these filters are engineered to be replaced after a certain period. However, if you insist on cleaning, you can follow the steps below:
- Disconnect the Power: Carefully unplug the appliance power cord from the outlet.
- Locate the Water Filter: Find the water filter based on the previous section in this article.
- Open the Water Filter Cover: Open the small door/cover to have access to the filter.
- Remove the Old Filter: For twist-out filters, twist the device counterclockwise until it stops, and for push-button eject ones, push the eject button to release it. Then, pull the filter out with ease.
- Flush the Filter: Hold the device under running water to flush any remaining debris or contaminants out. You can optionally soak it in a mixture of water and a mild detergent, and then rinse it thoroughly.
- Reinstall the Filter: For twist-out filters, insert the filter and twist it clockwise until it stops, and for push-button eject ones, insert the filter until the eject button pops out.
- Run Water Through the Dispenser: Run some water through the dispenser so any air and residue is purged.
- Reset the Water Filter Replacement Reminder Light: If your refrigerator has this light, reset it based on Amana’s instructions written in the user manual.
- Reconnect the Power: Again, plug the refrigerator’s power cord back into the outlet.
- Check for Leaks: Make sure there are no leaks around the filter housing.
- Dispose of the Old Filter: Throw the old filter away based on the recycling guidelines in your region.
Are There Alternatives to Amana Refrigerator Water Filters?
Certainly, you can find several alternatives to Amana refrigerator water filters on the market. The table below lists some of these alternatives along with a set of their notable features.
Alternative Filter | Notable Features |
IcePure RWF0900A |
|
EveryDrop by Whirlpool (EDR1RXD1, EDR3RXD1, EDR4RXD1) |
|
Mist Twist-in Refrigerator Water Filter (UKF8001) |
|
Waterdrop Plus Series |
|
AquaCrest Deluxe Series |
|
Final Words
As you can see, replacing Amana refrigerator water filters is an effortless and straightforward task. Still, it plays an enormous role in conserving the quality of your drinking water. To handle the replacement and cleaning processes, you can simply follow all the steps we explained today in a row.
The key point here is that routine maintenance and replacement of Amana refrigerator water filters in time is vital for any consumer if they want to guarantee the purity and cleanliness of their drinking water. This way, they can even prolong the lifespan of their appliances.
If you still have issues in replacing your water filter, keep in mind that resources such as your user manual and customer support are always available to help you with these. Keeping your filter up-to-date and fresh is a significant step in guaranteeing the health and safety of yourself and your family.
Related Post might be HELPFUL to your Business: The Latest Guide to Change Bosch Refrigerator Water Filters in 2024
